HOME | TESTIMONIALS | PHOTOS/VIDEOS | CONTACT | EMAIL | MAP

 BAIT/BAITING SUPPLIES:  RAZOR CLAM TEST | CLAM BAGS | CLAM BAG KITS | CRAB BAIT
 CRAB TRAPS/POTS/SUPPLIES:
 CRAB TRAPS | SUPPLIES
 HAULERS/WINDERS:  12 V WINDERS | AUTO DIPPERS | NETLESS AUTO DIPPERS | SS RAMPS/PROP STICKS
 
OTHER TRAPS:
 EEL POTS 
 SEASONING/
POTS/TOOLS:  SEASONING & POTS/TOOLS
 
SNOODS/LINE:  COMMERCIAL | CRAB LINE | RAZOR CLAM LINE | SNOODS/LINES | STEALTH LINE | KITS

410.287.6315 | 443.693.2438

HOME OF THE "STACKABLE" CRAB TRAP AND COMMERCIAL GRADE CRAB TRAP SUPPLIES

12-Volt Electric Crab Pot Haulers & Replacement Parts
BUY THE BEST - BUY THE ORIGINAL

The perfect solution for the commercial crabber who wants an inexpensive combination puller to pull in both crab pots and trot lines or any recreational crabber or shrimper who is tired of pulling in ANYTHING by hand!

WINDERS

OPTIONS

Cadillac Winder w/ SS
Click on picture to enlarge

All Cadillac winders come with a 48" free standing pedestal pole with floor and side bracket (included) that allows you to mount your winder anywhere in your boat.

All Cadillac winders have a 4" space between outside of sheaves and the inside of the box to allow plenty of room to retrieve snoods and clam bags.

All Cadillac winders include large 12" x 12" splash guard included.

Picture of the bottom underside of the Cadillac winder showing the motor, gear box, and with the water proof control box.

Item #SSCW

Custom made for Captain Bruce. Designed to be used with #8 (1/4" solid braid) or 1/4" 3 strand line with or without snoods and clam bags. This winder is enclosed with a 6061 marine grade guard with a flip top lid to prevent mud and dirt from flinging everywhere when operating the winder.

Cadillac Winder includes all of the following items as standard:
 -1/2 HP 12 volt DC marine grade sealed motor with O-ring seals to keep out moisture for long life -12" dia STAINLESS STEEL sheaves with galvanized liners - Heavy duty STAINLESS STEEL steel knife, with a 2 hp rated industrial gear box -Heavy duty 12-volt ON/Off switch and solenoid 48" (2 inch diameter pedestal pole (with foot mount and side bracket) is included -Standard includes 10 feet of #10 gauge marine grade wire with inline fuse for overload protection  with battery terminal ends attached. Other options sold separately. Retrieves up to 300 feet per minute. Weighs 57 lbs. All winders are adjusted and bench tested before shipment using #8 solid braid line and is ready to go right out of the box.  See additional options below.

Cadillac Winder
Click on picture to enlarge

All Cadillac winders come with a 48" free standing pedestal pole with floor and side bracket (included) that allows you to mount your winder anywhere in your boat.

All Cadillac winders have a 4" space between outside of sheaves and the inside of the box to allow plenty of room to retrieve snoods and clam bags.

All Cadillac winders include large 12" x 12" splash guard included.

Picture of the bottom underside of the Cadillac winder showing the motor, gear box, and with the water proof control box.

Item #CW

Custom made for Captain Bruce. Designed to be used with #8 (1/4" solid braid) or 1/4" 3 strand line with or without snoods and clam bags. This winder is enclosed with a 6061 marine grade guard with a flip top lid to prevent mud and dirt from flinging everywhere when operating the winder.

 Cadillac Winder includes all of the following items as standard: -1/2 HP 12 volt DC marine grade sealed motor with O-ring seals to keep out moisture for long life -12" dia steel sheaves with galvanized liners -Heavy duty Steel knife with a 2 hp rated industrial gear box -Heavy duty 12-volt ON/Off switch and solenoid 48" (2 inch diameter pedestal pole (with foot mount and side bracket) is included -Standard includes 10 feet of #10 gauge marine grade power cord with battery terminal ends attached. Other options sold separately. Retrieves up to 300 feet per minute. Weighs 57 lbs. All winders are adjusted and bench tested before shipment using #8 solid braid line and is ready to go right out of the box. See additional options below.

The "Basic" Winder
Click on picture to enlarge
Click to view a video


Item #BW

Custom made for Captain Bruce. Designed to be used with #8 (1/4" solid braid) or 1/4" 3 strand or larger line with or without snoods and clam bags. The Basic Winder is for those crabbers who want to save some money and mount or modify the winder for themselves The Basic Winder includes all of the following items as standard: -1/2 HP 12 volt DC marine grade sealed motor with O-ring seals to keep out moisture for long life -12" dia Steel backup sheaves with galvanized liners - Heavy duty steel knife - 2 HP rated industrial gear box -Heavy duty 12-volt ON/OFF -Includes item #11 SS rod holder mount OR foot holder mount with 12" high pipe (you decide which mount works best for you), Also -Includes 10' of #10 gauge marine grade power cord with 60 amp maxi fuse and terminal ends attached. Other options sold separately. Retrieves up to 300 feet per minute. Weighs 38 lb  See additional options below.

12 Volt Switch
Item #12VSW

Rated 50 amps switch with 32" long heavy duty wire. Ships FREE with purchase of Cadillac Winder.

Reg Price: $ 1699.00
Sale Price: $ 1499.00

Cadillac Winder for
#6 line w/ SS Knife
and Sheaves

Reg Price: $ 1749.00
Sale Price: $ 1549.00

Reg Price: $ 1499.00
Sale Price: $ 1299.00

Cadillac Winder for #6 line w/ Steel Knife and Sheaves

Reg Price: $ 1549.00
Sale Price: $ 1349.00

Reg Price: $ 1099.00
Sale Price: $ 899.00

Basic Winder for #6 line w/ Steel Knife and Sheaves

Reg Price: $ 1149.00
Sale Price: $ 949.00

$ 49.00 w/ purchase
 of Cadillac Winder

$ 59.00 w/o purchase
 of Cadillac Winder

OPTIONS

Winder Motor Power Cord
15 Foot

Item #WMPC15

Each winder comes with a standard 10 foot, fuse protected power cord.  Need more length? You can purchase either a 15, 20 or 25 foot cord. Select the length you need!

Winder Motor Power Cord
20 Foot

Item #WMPC20

Each winder comes with a standard 10 foot, fuse protected power cord.  Need more length? You can purchase either a 15, 20 or 25 foot cord. Select the length you need!

Winder Motor Power Cord
25 Foot

Item #WMPC25

Each winder comes with a standard 10 foot, fuse protected power cord.  Need more length? You can purchase either a 15, 20 or 25 foot cord. Select the length you need!

Cadillac Winder Option:
Stainless Steel Rod Holder Mount

Item #11

Ships FREE with purchase of Cadillac Winder.

$ 15.00

$ 30.00

$ 45.00

$ 69.00

 

1 1/2" PVC Rod Holder Mount

Item #169

Mounts into my Item #11 Rod Holder.

Hand Winder

Item #367

The poor mans winder.  It beats pulling your line in by hand.  Made from steel.  It can be mounted directly to your boat or you can make your own removable mounting bracket with a stud mount so it can be removed and put in your freezer (after you wind it up) for future use or you can order a complete rod holder mount by ordering Item #11 and #369. Bottom pic shows it with a #6 x 1000' snooded trot line (Item #343 on snood line page).

Steel Knife

Item #248

Steel knife for 12" diameter sheaves.

Stainless Steel Splitter (Knife)

Item #326

Weighs 2 pounds.

$ 79.00/ea

$ 69.00/ea

$ 59.00/ea

   $ 106.00/ea

OPTIONS

12" Galvanized Liners

Item #248

Hydro Sport 12" Steel Discs (Set of 2)

Item #310

Weighs 12 pounds.

Hydro Sport 12" Stainless Steel Discs (Set of 2)

Item #315

Weighs 10 pounds.
 

   $ 35.00/ea

   $ 99.00/Set of 2

   $ 249.00/Set of 2

 

Questions?  
Call Captain Bruce at 410.287.6315 or 443.693.2438 or email today!